Advanced Search
 
 
 
Browse by Category
 
 
 
Featured Brands
 
 
Tektronix TDS520 500MHz Oscilloscope
We apologize but this item is currently unavailable. Please feel free to browse our website for other available items.
Enlarge
Item Code:
OSCTEKTROTDS520
Manufacturer:
Model:
TDS 520 Dual Channel
Category:
Item Description

The Tektronix TDS520 oscilloscope is a graph-displaying device. It draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis. The Tektronix TDS520 oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.

Manufacturer: Tektronix
Part Numbers: TDS520

Two full-featured input channels, each with 8-bit vertical resolution, a sensitivity range of 1 mV/div to 10 V/div, and a selectable record length of 500 to 15,000 samples. A 50,000 sample record length is available with the 1 M option

• Two auxiliary input channels, similar to the full-featured channels but with only three vertical scale settings: 100 mV, 1 V, and 10 V
• Any two of the four input channels can acquire and display waveforms simultaneously
• A maximum digitizing rate of 500 MSamples/s with an analog bandwidth of 500 MHz - bandwidth selections at 20 MHz, 100 MHz, and 500 MHz
• Extensive triggering capabilities, such as edge, logic, and glitch
• Full programmability and printer/blotter output
• Advanced functions, such as continuously-updated measurements and local pass/fail decision making
• Specialized display modes, such as waveform averaging and variable persistence
• A unique graphical user interface, an onboard help mode, and a logical front panel layout, which combine to deliver a new standard in usability
• GPIB interface - options for RS-232 and Centronics interfaces
• Input coupling: DC, AC, or GND
• Input impedance selections: 1 MΩ or 50 Ω
• Seconds/division range: 500 ps/div to 10 s/div
• Time base delay time range: 16 ns to 250 s
• Delayed trigger time delay range: 16 ns to 250 s
• Time for pulse-glitch or pulse-width triggering: 2 ns to 1 s
• Display resolution: 640 x 480; display graticule: 401 x 501 pixels/8 x 10 divisions, where divisions are 1 x 1 cm

Specifications:


 

Form Factor

Benchtop

Bandwidth

500 MHz

Number of Channels

2 ch

Simultaneous Channels

2 ch

Simultaneous Maximum Sampling Rate/ch

250 MSa/s

One ch. only max. sampling rate

500 MSa/s

Max. Record Length

15000 pt/sec

Min. Vertical Sensitivity

1 mV/div

Maximum Vertical Sensitivity

10 V/div

Rise time

700 ps

Number of Bits

8 bits

Input Impedance

1 MOhm

Input Impedance (alternate)

50 Ohm

Input Coupling

AC,DC,GND

Maximum Input Voltage

400 Vrms

Main time base - lowest

500 ps/div

Main time base - highest

10 s/div

Timebase accuracy

0.0025 %

Trigger Source

Internal

Trigger Modes

Auto,Edge,Logic,Normal,Pulse,Single

Minimum Glitch Trigger

2 ns

Display Size

17.78 cm

Display modes

Dot,Persistence,Vector

Display Update Rate

200 wv/sec



 

 

 

        

 

Please wait...
The request is currently being processed.
Please do not navigate to another page during this process.
Thank you for your patience.
Cancel request