The MS-7093 Motherboard is based on ATi RS480/RX480 and ATi SB400 chipsets for optimal system efficiency. Designed to fit the advanced AMD K8 Athlon 64 FX processor, the MS-7093 delivers a high performance and professional motherboard solution.
Specifications:
| Product Type: | OEM - System Builder Motherboard, Backplate (I/O Shield) For Motherboard Is Not Included! |
| CPU | Supports 64-bit AMD® Athlon™ 64 and Athlon 64 FX processor (Socket 939) Supports up to 3500+, 3800+ Athlon 64 FX 53, or higher CPU |
| Chipset | ATI® RS480/RX480 Chipset - HyperTransport™ connection to AMD K8 Athlon 64 processor
- 8 or 16 bit control/address/data transfer both directions
- 1000/800/600/400/200 MHz "Double Data Rate" operation both direction
- Compliant with PCI Express 1.0a specifications (one ×16 graphics interface, which can be divided into two smaller links for use by other devices)
- Graphic integrated (RS480)
ATI® SB400 Chipset - Supports dual channel native SATA controller up to 150MB/s with RAID 0 or RAID 1 or 0+1
- Integrated Hardware Sound Blaster/Direct Sound AC97 audio
- Ultra DMA 66/100/133 master mode PCI EIDE controller
- ACPI and PC2001 compliant enhanced power management
- Supports USB 2.0 up to 8 ports
|
| Main Memory | Supports dual channel, eight memory banks DDR 333/400, using four 184-pin DDR DIMMs Expandable to 4 GB without ECC Supports 2.5 V DDR SDRAM DIMMs |
| Slots | One PCI Express ×16 slot (supports PCI Express Bus specification v1.0a compliant) Three 32-bit Master 3.3 V/5 V PCI Bus slots |
| Onboard IDE | An IDE controller on the ATI® SB400 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA 133/100/66 operation modes Can connect up to 4 IDE devices |
| Onboard Serial ATA | Supports 4 SATA ports with up to 150 MB/s transfer rate |
| USB Interface | 8 USB 2.0 ports (4 ports in the rear I/O, 4 ports via the external bracket) |
| LAN | Realtek® 8100C 10/100 LAN chip - Integrated Fast Ethernet MAC and PHY in one chip
- Supports 10 Mb/s and 100 Mb/s
- Compliance with PCI v2.2
- Supports ACPI Power Management
|
| IEEE 1394 (Optional) | VIA® 6307 IEEE 1394 controller - Supports up to two 1394 ports (1 at rear panel, 1 pinheader).
- Transfer rate is up to 400 Mbps
|
| Audio | RealTek ALC658C 6-channel software audio codec- Compliance with AC97 v2.3 Spec.
- Meets PC2001 audio performance requirement.
|
| On-Board Peripherals | - 1 floppy port supports 1 FDD with 360 K, 720 K, 1.2 M, 1.44 M and 2.88 Mbytes
- 1 serial port (optional)
- 1 VGA port (only for RS480)
- 1 parallel port supporting SPP/EPP/ECP mode
- 8 USB 2.0 ports (4 at rear, 4 at front)
- 1 Audio (Line-In/Line-Out/MIC) port
- 1 RJ-45 LAN Jack
- 2 IDE ports support 4 IDE devices
- 4 serial ATA ports
- 2 IEEE 1394 (1 at rear, 1 at front) (Optional)
|
| BIOS | The motherboard BIOS provides "Plug and Play" BIOS, which detects the peripheral devices and expansion cards of the board automatically. The motherboard provides a Desktop Management Interface (DMI) function which records the motherboard specifications. Supports boot from LAN, USB Device 1.1 and 2.0, and SATA HDD. |
| Dimensions | Micro-ATX Form Factor: 9.61 × 9.61 (24.4 cm × 24.4 cm) |
Fan Pictured - Is Not Included - For Detailed Specifications Only!
| A | I/O ports | M | Front panel connector |
| B | Serial COM1 connector | N | Speaker |
| C | CPU socket | O | USB 2.0 connectors |
| D | CPU fan connector | P | Battery |
| E | Memory slots | Q | IEEE 1394 connector |
| F | ATX power connector | R | PCI slots |
| G | Floppy disk drive connector | S | AUX Line-In connector |
| H | Primary IDE connector | T | Front panel audio connector |
| I | Secondary IDE connector | U | CD-In connector |
| J | SATA connectors | V | PCI Express ×16 slot |
| K | Clear CMOS jumper | W | System fan connector |
| L | Clear BIOS password jumper | X | Auxiliary 12V ATX connector |