eMachines Augsburg Intel 915G Chipset Motherboard. This motherboard supports Intel® Pentium® 4 LGA775 processors, Intel Graphics Media Accelerator 900, PCI Express graphics, DDR 400/333 MHz memory, and Intel High Definition Audio.
Replacement board for Gateway / Emachines: 506GR 550GR 5200S Series / 420GR 420GH 505GH 503GR 815GM 508GE
Specifications:
Product: Motherboard Only, No Processor Or Fan Included.
Gateway / eMachines Exact Replacement Part#'s: 103630 103943 104399 105354 2522272 2522273 WMEOEMD915GVAGLG3
Other Gateway / eMachiens Compatible Part Numbers: 102175 103390 2521775 2522139 2522140 2522141 2522142 2522143 2522144 2522145 2522146 2522147 2522148 2522149 2522150 2522151 2522152 2522153 2522154 2522155 2522201 2522202 4000964 4000966 TMEOEMD915GAGLG1 WMEOEMD915GAGLG1 2521779 2522166 2522173 2522174 2522175 2522176 2522177 2522178 2522179 2522180 4000983 WMEOEMD915GUXKG1 OEMD915GAGLG1 MBEM102175AG
Intel Part Numbers: D915GAG / D915PSY
Please Note: This Model Comes With FireWire Connector
Download Drivers Here
Direct Manufacturers Link
More Pictures Below!
| Form Factor | microATX Form Factor (9.60 × 9.60 inches [243.84 × 243.84 millimeters] |
| Processor | Support for an Intel® Pentium® 4 processor in an LGA775 socket with an 800 or 533 MHz system bus |
| Memory | - Four DDR SDRAM Dual Inline Memory Module (DIMM) sockets
- Support for DDR 400 MHz and DDR 333 MHz DIMMs
- Support for up to 4 GB of system memory
|
| Chipset | Intel® 915G Chipset, consisting of: - Intel® 82915G Graphics Memory Controller Hub (GMCH)
- Intel® 82801FB I/O Controller Hub (ICH6)
- 4-Mbit Firmware Hub (FWH)
|
| Video | Intel® GMA900 onboard graphics subsystem |
| Audio | Intel® High Definition Audio subsystem using the Realtek ALC860 audio codec |
| I/O Control | Support for USB 2.0 devices |
| Peripheral Interfaces | - Eight USB ports
- One serial port
- One parallel port
- Four Serial ATA interfaces
- One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
- One diskette drive interface
- PS/2 keyboard and mouse ports
|
| LAN Support | 10/100 Mbits/sec LAN subsystem using the Intel® 82562EZ Platform LAN Connect (PLC) device |
| BIOS | - Intel/AMI BIOS (resident in the 4 Mbit FWH)
- Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS
|
| Instantly Available PC Technology | - Support for PCI Local Bus Specification Revision 2.2
- Support for PCI Express Revision 1.0a
- Suspend to RAM support
- Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports
|
| Expansion Capabilities | - Two PCI Conventional bus connectors
- One PCI Express x1 bus add-in card connector
|
| Hardware Monitor Subsystem | - Hardware monitoring and fan control ASIC
- Voltage sense to detect out of range power supply voltages
- Thermal sense to detect out of range thermal values
- Three fan connectors
- Three fan sense inputs used to monitor fan activity
- Fan speed control
|
| Item | Description | Item | Description |
| A | Rear Panel I/O Ports | M | Front Chassis Fan Connector |
| B | Auxiliary 12-V ATX Connector | N | Serial ATA Interfaces |
| C | CPU Socket | O | Front Panel Header |
| D | CPU Fan Header | P | Front USB Connector |
| E | Memory Slots | Q | Front USB Connector |
| F | Standby Power Indicator LED | R | Front Panel IEEE-1394a Connectors |
| G | Floppy Disk Drive Connector | S | Speaker |
| H | ATX Power Connector | T | PCI Express x1 Connector |
| I | Parallel ATA IDE Interface | U | Front Panel Audio Connector |
| J | Battery | V | PCI Slots |
| K | Intrusion Switch Header | W | Rear Chassis Fan Connector |
| L | BIOS Configuration Jumper | |
The rear I/O ports for the Augsburg motherboard consist of a PS/2 mouse port, PS/2 keyboard port, serial port/ parallel port, VGA port, three audio jacks, four USB ports, an IEEE-1394a port, and a NIC port.