Crestron PRO2 C2ENET-1 | Crestron PRO2 Control System Processor

Genuine Original Crestron PRO2 Professional Control System Processor with 1-Port Ethernet Interface Card C2ENET-1. The PRO2 is a completely new solution-driven control and network information system. It’s the ideal solution for even the most complex home automation and control applications. At the heart of the PRO2 is the breakthrough 2-Series Control Engine, based on the hot new 257 MIPS, 32-bit Motorola ColdFire processor. Onboard 36MB memory is enhanced with a 4GB expansion slot that supports off-the-shelf Type II compact flash memory and the IBM Microdrive hard disk drive, for on-board storage of program and touchpanel files, room and equipment profiles, upgrades, databases and schedules. Crestron’s unique Dual Bus system, with its high-speed I/O bus architecture, provides blazing fast throughput system wide.This Dual Bus architecture also lets you upgrade to the new, higher performance expansion cards, while still using your existing cards and software programs.The 40Mb/s Y-Bus supports existing CNX control cards and serves as the pipeline for IR, serial communications and relays. The 300Mb/s Z-Bus is designed for super high speed control card applications, such as 10/100 Ethernet, and future USB, USBII, FireWire, disk drive arrays and more.

Model Number: Crestron PRO2

Also Included:
1 x C2ENET-1

Specifications:

Processor	CPU: 32-bit Motorola 5407 ColdFire Processor Processing Speed: 257 MIPS (Dhrystone 2.1 benchmark)
Memory	On-board Memory: 36MB Expandable Memory: Compact Flash slot (up to 4GB) accessible on rear panel accepts standard Type II Compact Flash or IBM Microdrive
Dual Bus Architecture	Y-Bus: · 40 Mb/s parallel communications · IR/Serial ports: 8 programmable simultaneous outputs for IR, TTL Level RS-232 or serial interface; signal (S) and ground (G) pins; infrared output up to 1.2MHz · I/O Versiports: 8 programmable analog and digital inputs as well as digital outputs · Relay ports: 8 normally open relays, isolated with MOV suppression · Communication ports: 6 bi-directional ports for RS-232/422/485; Ports 1-4 Cresnet Accelerator ready · Built-in 3-slot card cage supports Crestron’s existing CNX and 2-Series expansion cards Z-Bus: · 300 Mb/s parallel communications · 1 expansion card slot. Optional cards include: · C2ENET-1: Single Port 10/100 BaseT Ethernet · C2ENET-2: Dual Port WAN-LAN-10/100 BaseT Ethernet · Future Support for USB, USB II, FireWire, Disk Drive Array
Computer console	1 RS-232 port (accessible from front or rear panel), 9-pin DB9 for programming with a PC
Cresnet port	1 4-pin male connector, expandable via optional Cresnet Network Accelerator, which increases the effective network speed, fan-out and device addresses by a factor of 8 for each poll accelerator added to the system
Ethernet (w/optional C2ENET-1/2)	10/100 BaseT Ethernet · Built-in Firewall for ultimate security · Dynamic/static IP and full duplex TCP/IP, UDP/IP, SMTP · Built-in Router · Built-in Network Address Translator (NAT) · Built-in Web Server: Memory storage on Compact Flash Car
Operating System	Real-time, preemptive, multitasking kernal · Multi-threaded · FAT32 file system with long names · Fully compatible with existing SIMPL™ Windows® and SIMPL+™ programs · Enhanced SIMPL+ instruction set
Menu Function Buttons	PANEL: Programmable interface offering command text, indirect text, and hierarchical screen structure INFO: Displays system information including the loaded SIMPL program MSG: Displays system alarms and error messages TIME: Permits alterations to system date and time; access code required COM:Monitors the transmission and reception traffic on each COM port
LED Indicators	PWR, NET, ERR, LNK A, ACT A, LNK B, ACT B, COM TXD (A-F), COM RXD (A-F), COM RTS (A-F), COM CTS (A-F), IR-SERIAL (A-H), INPUT-OUTPUT (1-8), RELAY (1-8), SLOT (1-3)
Power Requirements	100-240VAC, 2.4A, 50/60Hz, internal universal power supply