APC SURT5000XLT Smart-UPS 5000VA 208V RT Series Online Double-Conversion Rack/Tower Extended Runtime UPS. Capable of supporting 5kVA in a 3U rack/tower convertible form, users can support power hungry blade servers or heavily loaded equipment racks. This flexible form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching battery packs to comply with aggressive runtime demands of business- systems.
Model Number: SURT5000XLT
*This is a used item and it does have scratches and scuff marks. Item as pictured", front plastic cover is missing although it does not affect performance in any way!
Features:
• Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
• Scalable runtime Allows additional run time to be quickly added as needed.
• Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
• Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
• Network manageable Monitor and control the UPS and access environmental information remotely via included PowerChute software or APCs Network Management Card with temperature monitoring.
• Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
• Flash-upgradeable firmware Easy implementation of new firmware upgrades.
• User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
• Disconnected battery notification Warns when a battery is not available to provide backup power.
• Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
• Generator compatible Ensures clean, uninterrupted power to the loads in the event of an extended power outage.
• Cold-start capable Provides temporary battery power when the utility power is out.
Specifications:
Output:
• Output Power Capacity 3500 Watts / 5000 VA
• Nominal Output Voltage 208V
• Output Voltage Note Configurable for 208 or 240 nominal output voltage
• Frequency (sync to mains) 50/60 Hz +/- 3 Hz
• Waveform Type Sine wave
• Output Connections
- (2) NEMA L6-20R
- (2) NEMA L6-30R
Input:
• Bypass Internal Bypass (Automatic and Manual)
• Nominal Input Voltage 208V
• Input Frequency 50/60 Hz +/- 5 Hz (auto sensing)
• Input Connections NEMA L6-30P
• Cord Length 10 feet (3.05 meters)
• Input voltage range for main operations 160 - 280V
• Input voltage adjustable range for mains operation 100 - 280V
• Other Input Voltages 240
Batteries & Runtime:
• Included Battery Modules 2
• Typical recharge time 2.50 hour(s)
• Replacement battery cartridge RBC44 RBC™ Quantity 1 per module
• Typical Backup Time at Half Load 15.4 minutes (1750 Watts)
• Typical Backup Time at Full Load 5.0 minutes (3500 Watts)
Communications & Management:
• Interface Port(s) DB-25 RS-232,Smart-Slot
• Pre-Installed SmartSlot™ Cards AP9619
Physical:
• Height 17.00 inches (432 mm)
• Width 5.10 inches (130 mm)
• Depth 26.00 inches (660 mm)
• Rack Height 3U
• Net Weight 120.00 lbs. (54.55 kg)
• Shipping Weight 140.00 lbs. (63.64 kg)
• Audible noise at 1 meter from surface of unit 55 dBA
• Online Thermal Dissipation 1040.00 BTU/hr
*Due to it's heavy weight, this item is sold with local pickup only.
